In Part 1 of this column, I talked about the details that can help ensure a person you’re mentoring goes from being a new hunter to a life-long hunter. Fun should be at the top of the list there, but you also need to cover the realities of a hunt.
Safety — First, Last, Always
Hunting has one of the lowest percentage rates of accidents of all sports. This is because hunters have been taught right out of the gate that if not handled safely guns can be dangerous — and we take that seriously.
Once your new charge is ready to actually participate in a hunt as a hunter, rather than an observer, firearms safety should be the first thing you teach them. If you’ve been doing your job as a mentor up to this point, you will already have imparted many lessons — load your gun only after you’re in your treestand or blind, don’t cross a fence with a loaded gun, make sure of your target and what’s beyond it, etc. — but now that the gun will be in their hands, strict attention to all aspects of safe firearms handling must be adhered to until your new hunter is fully, consciously committed to the rules of firearms safety.
When your new hunter is a youth, know that keeping them from holding a firearm only makes them more curious. Under your supervision, allow your children to handle your firearms. Show them how to check and make sure the gun is fully unloaded. Let them hold the weapon and show them how to point it in a safe direction. Explain to them to never take the safety off or to put a finger on the trigger until they are sure of their target and ready to shoot.
Gun safety is top priority when introducing anyone to hunting.
My first gun was a BB gun. With this gun, I was able to learn how to properly handle a weapon. It’s still a great tool for teaching new hunters safe firearms handling (even adults). Start by treating the BB gun exactly as you would a rifle or shotgun — all the safety rules apply. Allow the new hunter to carry it alongside you in the woods, at first unloaded, and correct their hold, carry or aiming as needed so that the good habits become ingrained.
When your charge is becoming reliable in their handling and demonstrating good safety, introduce BBs into the picture and head to the range for the lessons on aiming, breathing and trigger control. Allow one round in the weapon at a time initially. When both of you are comfortable, move on to a centerfire rifle or shotgun appropriate to the hunt you’ll be participating in.
This is the time to talk about game anatomy and the importance of making a lethal hit. Stress that, in hunting, there is nothing worse than wounding an animal and not being able to recover it. Emphasize that a hunter should exhaust all efforts in the recovery process in the case that an animal is wounded — and explain that at one point in every hunter’s time afield, an animal will be wounded and not found. It’s unfortunate and tragic, but ethical hunters minimize the chances of it happening by practicing with their firearms and understanding how to place a proper, quick-killing hit on the vitals of the game they’re pursuing.
Dealing with the Kill
The death of an animal is part of hunting. Some will have a harder time accepting death than others, especially children. For new youth hunters then, help them understand that although it’s okay to be sad, hunting is important to keeping wildlife populations at healthy, sustainable levels. If you’ve already talked about that when they joined you in the field as an observer, it will be easier for them to see that hunting isn’t just about the killing.
Whether it is hunting deer, squirrels or anything in between, it is vital to be a positive role model.
Sadness isn’t the only reaction you’ll get from a hunter who has successfully taken their first game animal. Some will rejoice at a kill, others will be sad, and some will be scared to death. Whatever their reaction is should be acceptable, so long as they show respect for the animal.
Understand that some will not be able to wait for their next hunt while others will not want to go hunting again. When the latter happens with a child, particularly younger kids, leave it at that. Do not pressure him or her to hunt again, as it will only drive them further away. Sometimes people, kids included, need time to digest the totality of hunting and will return to participate again whenever the “I’m ready” strikes them — but undue pressure is a sure way to make sure that “ready” never happens.
Their First “Trophy” is Whatever They Want it to Be
A new hunter should be allowed to harvest any legal animal. That may not be your choice. If you are, say, a deer hunter who won’t shoot anything less than a 130-class buck, that’s fine. Just don’t expect someone who’s just getting excited about hunting to show that kind of restraint. You want this to be fun! Asking a new hunter to continually pass up shots on legal game just because you wouldn’t take them is a great way to kill off their enthusiasm.
Emphasize the Positive
Every experienced hunter made mistakes on the way to getting that experience. If we were lucky, we had someone alongside us to correct us as we went along.
That’s the position you’re in now, as a mentor, the position of making corrections. But a constant stream of “You’re too noisy,” “Sit still” and “Don’t do that” can quickly knock the excitement out of someone new to the hunt.
When you’re in the field with a new hunter, make sure to let them know when they’re doing a good job. Let them know when they’ve made a good shot, handled the firearm properly, and made a good, quick recovery on a downed animal. This will give them the confidence they need to handle firearms safely and hunt on their own
Share This Article
HUNTING
RELATED ARTICLES
Celebrate National Hunting & Fishing Day
National Hunting and Fishing Day is this Saturday, September 28, and NSSF, as a major sponsor, encourages all sportsmen and sportswomen to participate.
Celebrating National Hunting and Fishing Day!
On the fourth Saturday of every September, NHF Day recognizes generations of sportsmen and women for their contributions to the conservation of our nation’s rich sporting heritage and natural resources. One of the main goals of National Hunting and Fishing Day is to recruit new hunters and anglers by encouraging participation and increasing public awareness of the connection between hunting, angling, and conservation. Through self-imposed fees and excise taxes, sportsmen and women have raised more than $57 billion--that’s more than $100,000 every 30 minutes being raised for conservation. Now on its 51st year, NHF Day is the largest, most effective grassroots movement ever undertaken to promote outdoor sports and conservation.
Launched by Congress in 1971 and heavily promoted by NSSF for decades, NHF Day is now administered by Wonders of Wildlife Museum and has consistently recognized hunters and anglers for their leadership in wildlife and conservation.
Find national, state, regional and local organizations hosting related events.
Get Started
Hunting, Fishing, and Shooting Sports are not just great American pastimes – they are the very foundation that supports the model of wildlife conservation created more than a century ago in this country. By introducing new audiences to these activities, we ensure that wildlife and wild places will be protected for generations to come.
Hunting is a useful and beneficial wildlife management tool that ensures and maintains the health and abundance of game species and the balance of our natural resources. There are a number of species, from upland birds to big game animals to hunt. Learn more about these species from game bird and game animal organizations.
Take the Pledge
Take the pledge and submit a photo of you engaging in outdoor activities like hunting, fishing, or shooting to enter our exclusive NHF Day giveaway featuring a custom hat, stickers, and a Bass Pro Shops gift card!
Share Your Images
Upload an image of you hunting, fishing or target shooting and tag @NHFday on social media using the hashtag #GuideToOutside or Upload an image to be featured here!
Understanding the Crucial Relationship Between Firearm Manufacturers and Wildlife Conservation
NSSF, SIG SAUER, AFWA and USFWS unite to ensure the future of wildlife and habitat for many years to come.
The importance of the relationship between manufacturers like Sig Sauer and wildlife conservation can’t be understated. The symbiotic nature of the excise tax funding model in the United States allows for all involved parties to benefit, and further, the funds generated benefit all citizens through great conservation projects and supporting healthy fish and wildlife populations.
https://youtu.be/ecmFvQfXHeo?si=_YbigDX71L7ZF7oD
In the latest video in our Partner with a Payer series, representatives from various wildlife agencies visited Sig Sauer’s facility in Newington, NH, to see how the money from excise taxes, paid by manufacturers, supports conservation efforts. Read NSSF's press release here.
Financial Impact of the Pittman-Robertson Act
Since its implementation, the Pittman-Robertson Act has generated over $16.4 billion (more than $25 billion when adjusted for inflation) for states across the U.S. These funds are pivotal for wildlife conservation, hunter education programs, and the development of public shooting ranges. Joe Bartozzi, NSSF President and CEO, emphasized the critical nature of the partnership between firearm and ammunition manufacturers and state and federal wildlife agencies. This symbiotic relationship, he noted, has been instrumental in the success of conservation efforts over the past several decades.
SIG SAUER’s Contributions
Tom Taylor, an executive at SIG SAUER, explained that the company does more than just make products. SIG SAUER takes pride in providing significant funding for initiatives that support hunters, wildlife conservation, and other projects funded by the Pittman-Robertson Act. Their contributions help maintain healthy habitats and create public shooting sports ranges, showing their commitment to the environment.
The Significance of Excise Taxes
The excise taxes collected from manufacturers like SIG Sauer are indispensable for state fish and wildlife agencies. These funds support a broad array of conservation activities, from buying land for habitat preservation to active habitat management.
Broad Benefits of Conservation Funding
The benefits of these funds extend beyond the hunting and shooting communities. The conservation efforts supported by excise taxes enhance biodiversity, preserve natural habitats, and contribute to the overall health of ecosystems. This, in turn, benefits all citizens, as healthy environments are crucial for clean air, water, and the overall well-being of communities.
The partnership between firearm manufacturers and wildlife conservation agencies is a model for the world. It shows how industry participation can positively impact the environment and highlights the need for ongoing support for conservation efforts.
In short, the relationship between firearm manufacturers and wildlife conservation is vital. By understanding how excise taxes and industry contributions fund conservation, hunters and shooters can see the positive impact their purchases have on preserving nature for future generations.
Partner with a Payer
The Partner with a Payer initiative was developed to help generations of employees in the firearm, archery and angling industries, state agencies and the U.S. Fish and Wildlife Service to better understand their, and each other’s, roles in conservation.
More info and resources at https://www.nssf.org/partner-with-payer/See other Partner with a Payer Videos:
https://www.letsgohunting.org/resources/articles/explore-hunting/how-do-excise-taxes-benefit-hunter-education-clark-county-shooting-complex/
https://www.letsgohunting.org/resources/articles/explore-hunting/how-excise-taxes-support-fish-restoration-conservation-and-more/
https://www.letsgohunting.org/resources/articles/explore-hunting/understanding-excise-taxes-wildlife-conservation-bighorn-sheep-population-management/
To meet consumer demand, knife manufacturers are constantly upping their game.
By Christopher Cogley
The old saw, “A knife is a knife is a knife,” has never been a more blatantly inaccurate statement than it is today. There are more knives, of myriad design, on the market than ever before. To meet widespread demand knife manufacturers are continuously upping their game with new designs and materials and innovative functions that reset the bar on an almost daily basis. Companies are continuing to place importance on both the functionality, and the unmistakable aesthetic appeal, of the knives that carry their brand. Here is a look at some of the many new knife models that consumers will want to see in your store in 2024.
5.11
Respected tactical brand 5.11 is keeping up with its “Always Be Ready” mantra with the launch of two new tactical folders designed to be practical in practically any situation. Both the Braddock DP Full and Braddock DP Mini have D2 drop-point blades with a noticeable swedge and stone-wash finish. The DP Full features a 3.5-inch blade and a 4.9-inch closed length while the Mini has a 3-inch blade and 4-inch closed length. Available in either black or tan, both knives have G10 handles with liner locks and deep crimping. SRP: $50, Full; $40, Mini.
Check these out on: 511tactical.com
Bear & Son Cutlery
Bear & Son’s expanded brands will offer a wide variety of new knives catering to consumers with a range of backgrounds and interests. As part of its Bear Ops brand, Bear is launching the Rancor IX. The tactical folder has a 2¾-inch blade made from Sandvik 14c28n steel with a black finish. The blade is housed in a Zytel handle with a side lock. SRP: $100. The Bear Edge brand will feature the new Brisk 2.0. The 2¾-inch 440 stainless-steel blade has a black oxide coating. Housed in a black Zytel handle, the Brisk blade is deployed with assisted opening release. SRP: $32. Bear & Sons is also releasing the Rancher Sideliner folding knife with a 3 3/8-inch D2 steel blade. With an overall length of 7 5/8 inches, the Rancher Sideliner has a titanium handle with steel liners. SRP: $125.49.
Check these out on: bearandsoncutlery.com
Benchmade
Benchmade is continuing its long-held tradition of creating knives that combine artistry with extreme functionality with the launch of the Seven-Ten folder. A product of the collaboration between Bill McHenry and Jason Williams (the duo responsible for creating Benchmade’s patented AXIS lock in 1999), the Seven-Ten is a fitting tribute to the 25th anniversary of the innovative locking mechanism. Featuring a 4-inch clip-point blade made from premium stainless steel housed in a stylish aluminum handle, the Seven-Ten is a knife you won’t want to leave in your pocket. SRP: $450. Benchmade is also releasing a filet knife designed to make short work of cleaning the daily catch. The Fishcrafter has a 9-inch trailing point CPM-MagnaCut steel blade with Benchmade’s SelectEdge technology. With an overall length of 13.94 inches the Fishcrafter has a Santoprene handle with a finger guard and jimping for a secure hold no matter how slick the hands. SRP: $260 (includes a sheath).
Check these out on: benchmade.com
Boker
Boker is using SHOT Show 2024 to re-launch a classic blade with a modern flair. The 943 BRLW folder features a 2.56-inch MagnaCut blade with a two-tone satin finish. With an overall length of 6 inches and tipping the scale at 2.3 ounces, the BRLW has titanium scales and pocket clip that add to its sleek, stylish design. SRP: $279.
Boker is also paying homage to the iconic American Muscle Car this year with the launch of the new Mach-1 Damast. Designed by Tomaso Rumici, the Mach-1 features a 3.35-inch hand-forged Chad Nichols Damascus blade made with steel from a 1969 Mustang Mach-1. Featuring a stylish aluminum handle with old anodized inlays, the Mach-1 will be one of those knives people can’t wait to take out of their pockets. SRP: $569. Rounding out Boker’s offerings this year is the new Urban Trapper Automatik. Building off the original Brad Zinker design, the new automatic version of the original Brad Zinker Urban Trapper features a 3.35-inch MagnaCut blade with stonewashed flats and satin bevels. The Urban Trapper Automatik has a black matte anodized handle with a deep-carry stainless steel clip.
Check these out on: bokerusa.com
Browning
In keeping with its tradition to provide hunters with all the tools they need to be successful in the field, Browning is releasing two new hunting knives at this year’s SHOT Show. The Primal Scalpel 2 Blade Folder features a deep-belly stainless-steel blade alongside a stainless-steel scalpel blade in a compact folder. The knife comes with a blade installation/removal tool that doubles as a place to store extra scalpel blades. Both blades are 2¾ inches long and are housed in a polymer handle with rubber scales. SRP: $60.
The Guide Series Small Fixed blade knife is a solid, full-tang knife with a 3-inch Sandvick 14C28N stainless-steel blade with a Micarta handle. The compact fixed-blade knife is only 7 inches overall and comes with a leather sheath. SRP: $170.
Check these out on: browning.com
Buck
Buck has long had a large and loyal following among serious hunters, and this year Buck is showing exactly why that loyalty is so well-deserved. In keeping with the changing needs of today’s hunters, Buck is launching the Alpha Elite series of fixed-blade knives. The collection includes three separate knives designed to handle the different tasks that hunters undertake when field dressing a wide variety of game. The smallest of the knives is the 662 Alpha Scout Elite with a 3.75-inch blade and two sets of jimping designed for the precision work of caping or cleaning smaller game. The 663 Alpha Guide Elite has a 4.375-inch blade and an overall length of 9 inches. The straight spine and drop-point blade are crafted to handle the toughest tasks at camp or in the field. Rounding out the offering is the 664 Alpha Hunter Elite. The 3.75-inch blade has a deep belly and generous jimping to make it an ideal choice for skinning big game. All of the knives in the collection are made from MagnaCut steel and feature textured G10 handles. Adding to the modern style of the Elite series, the knives all come with black Kydex sheaths with belt loops and multiple attachment points. SRP: $208-$240.
Check these out on: buckknives.com
Cold Steel
Cold Steel is launching its updated Recon M1 knife at SHOT Show 2024. Handcrafted in Italy, the Recon M1 has a 4-inch MagnaCut steel blade with a black stonewash finish. The blade is housed in a G-10 handle with deep finger grooves for a secure grip. The knife features Cold Steel’s patented Tri-Ad locking mechanism and integrated pocket clip. SRP: $280. Booth #12865 (coldsteel.com)
Check these out on: coldsteel.com
Camillus
The Camillus Camp Hatchet is designed to be the go-to tool for any camping chore. The 5.25-inch drop-forged head has a 3-inch cutting blade and is mounted on a 13.5-inch U.S.-sourced hickory handle. With a 16-inch overall length and weighing in at 2 pounds, the Camp Hatchet is stout enough to bang around with the best of them and balanced enough to make tough chores more manageable. SRP: $40 (includes a leather blade cover with sturdy rivets).
Check these out on: camillusknives.com
Columbia River Knife & Tool
Columbia River Knife & Tool continues to move the bar on both style and functionality this year with the launch of the Redemption folder. Designed by legendary knifemaker Ken Onion, the Redemption pays tribute to the gamblers and outlaws of the American West with a 4-inch spear-point blade, which is completely concealed in the streamlined handle when closed. The blade is the first CRKT knife to be made from CPM MagnaCut steel. The Redemption is also the first Onion-designed knife to feature the ambidextrous Crossbar Lock, which is used to both deploy and disengage the stonewashed blade. As elegant as it is functional, the U.S.-made Redemption has a G10 handle with a stainless-steel bolster and deep pocket clip. It has an overall length of 9.2 inches and weighs in at 4.9 ounces. SRP: $225.
Check these out on: crkt.com
Outdoor Edge
Outdoor Edge is set to make big waves in the EDC category this year as it launches a new line of EDC options that all incorporate its RazorSafe replacement-blade system. The line includes five different styles and seven different options for consumers to choose from. At the high end is the VX5 with a carbon-fiber handle and ceramic ball-bearing pivot release (SRP: $70). The VX1-VX4 knives are available with a variety of features and handle types in either a black-oxide coated or stainless-steel blade-holder option. The knives are also available with either stainless-steel ball-bearing pivot or spring-assisted opening mechanisms. All the knives have 3-inch replaceable blades available in standard edge or half-serrated options. SRP: $40-$70.
Check these out on: outdooredge.com
Spyderco
Spyderco has long been known for high-quality knives that stand the test of time, and the new launches at this year’s SHOT Show are no exception. Among the new introductions is the hefty Bodacious folder. Named after a rodeo bull deemed “the world’s most dangerous bull,” the USA-made Bodacious has a deep 3.7-inch blade made from CPM S30V steel housed in a G10 handle. Available with either a stainless or Spyderco’s black diamond-like coating. SRP: $350-$372. Spyderco is also releasing several new additions to its increasingly popular Salt Series of corrosion-resistant knives. The Manix 2 Lightweight Salt has a 3.4-inch blade made from CPM MagnaCut steel, which was created to deliver outstanding blade retention, strength, and corrosion resistance. The blade is housed in the bright yellow fiberglass-reinforced co-polymer handles that have become a signature for the Salt Series. The Manix 2 has a ball-bearing locking mechanism and a tip-up wire clip. SRP: $232.
Spyderco is also releasing two new versions of their popular Para Military knives into the Salt Series. The Para Military 2 is available in either a stainless blade with a yellow-and-black non-slip G-10 handle or a black blade with a solid black non-slip G-10 handle. Both knives have a 3.45-inch MagnaCut steel blade. Like all of the other knives in the Salt Series, the stainless-steel liners, pocket clip, and all other hardware in the new Para Military knives are made from corrosion-resistant marine-grade materials. SRP: $295-$315.
Check these out on: spyderco.com
SOG
In 2024 SOG is giving its popular Seal XR folder a serious upgrade. The new Seal XR L-TI is SOG’s first knife that features a MagnaCut steel blade. The 4.3-inch blade has a black Cerakote finish and is deployed with a finger flipper. The knife has also been upgraded with a titanium liner, which drops its weight down to a slim 4.4 ounces. Deeply ridged on both the spine and underbelly for a secure grip regardless of how it’s held, the Seal XR L-TI includes black, gray, and ODG handles that give users the option of switching out handles based on the situation. SRP: $300.
Check these out on: sogknives.com
W.R. Case
Case is releasing several new knife families this year. Among the new introductions is the Bridgeline folder. Combining Case tradition with a modern flair, the Bridgeline has a composite-and-wood handle with aluminum frames and bolsters to cut the weight down to a mere 2.8 ounces. The 2.75-inch blade is made from CPM20CV steel and features a Wharncliffe tip. SRP: $165.
Returning to the Case lineup for 2024 is the Razor. Available with a wide variety of handle materials, the Razor features a 3-inch main blade with a distinctive hook on its tip that harkens back to the original 1940 design that users actually shaved with. Available in either single-blade or double-blade options. SRP: $73-$321.
Check these out on: caseknives.comYou may also be interested in:
https://www.letsgoshooting.org/resources/articles/shotgun/new-shotguns-hitting-shelves-in-2024/
https://www.letsgoshooting.org/resources/articles/handgun/new-handguns-coming-to-stores-in-2024/
See more products highlighted during the 2024 SHOT Show
https://youtube.com/playlist?list=PLecWOcK1HLTzGEhgEOcaHyelAHIvfysIY&si=yQhVd_0Z9_cVKRxj
We use cookies to ensure we give you the best experience on our website. By clicking "Accept" or using our website, you consent to the use of cookies unless you have disabled them. ACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.